powder compact
英 [ˈpaʊdə(r) kəmˈpækt]
美 [ˈpaʊdər ˈkɑːmpækt]
网络 粉盒; 粉饼; 粉末压坯; 粉饼盒; 粉末压块
双语例句
- The lady opened her handbag and took out her powder compact.
那位妇女打开了手提包，拿出了粉盒。 - Research on the Technology of Fe-based Powder Compact Sintering-Solid Boronizing
铁基粉末压坯烧结&固体渗硼技术研究 - Direct Reduction Carburization Processing for Ultrafine WC-based Hardmetal Powder Materials; sintered tungsten carbide compact bit
超细碳化钨基硬质合金粉末及材料的直接还原碳化技术镶碳化钨硬合金齿钻头 - Effect of morphology and particle size distribution of tungsten powder on compacting performance and green compact strength
钨粉形貌与粒度分布对成形性和压坯强度的影响 - The Pointed End Sintering Model for a Fractal Geometry Model of Powder Compact
固体粉末的分形几何体尖端烧结模型 - Free upsetting, as a typical forging process, has been selected to investigate the densification and deforma-tion behavior of the powder sintering compact. A new densification model of porosint has been proposed and the plas-tic theory of porosint has been introduced briefly.
选择典型的镦粗工艺对粉末烧结坯的致密与成形行为和规律进行了研究，提出了多孔材料的致密模型并简要介绍了多孔材料的塑性理论。 - In order to solve the heating method of the powder warm compact, this paper presents a heating mode with an electrical heater element by theoretical analysis and calculation, and designs a mold heating equipment.
为解决粉末温压设备的加热问题，本文通过理论分析和计算采用电加热方式，根据实际需要设计并选择合理可行的模具加热装置。 - In this paper, performances of diamond synthesized respectively with powder catalyst and with compact catalyst were compared. Difference of the preparation process and synthesize system between the two catalysts has been studied.
比较了片状触媒和粉状触媒合成金刚石的性能，并从触媒材料的制备工艺及合成体系方面分析了造成性能差异的原因。 - The characteristics of metal powder compact, which provide the viability of microwave sintering, are comprehensively summarized. Electron's movement behavior in electric-agnetic field is analyzed and eddy loss is stated to be one of the mechanisms of microwave sintering.
在此基础上，总结了金属粉末压坯的特点，阐述了微波烧结金属粉末压坯的可行性，分析了自由电子在电磁场中的运动行为，指出涡流损耗是微波促进烧结的机理之一。 - Study on One Dimension Heat Transfer Model of Fe-Ti-C Powder Compact during Pouring
浇注条件下Fe-Ti-C系粉末压坯一维传热模型的研究 - The annealing process is necessary to improve the compressibility of iron powder and to get medium and high compact density.
而铁粉的还原退火对改善铁粉的压缩性，获得中、高密度压件是必要的。 - Application of Powder Compact Nodularizer
粉末压制成型球化剂的应用 - Powder compact foaming process for producing aluminum foams consists of mixing, compacting and foaming.
粉末实体发泡法泡沫铝制备工艺包括混合、压制和发泡三个过程。 - The Research of Inorganic Viscose Water Smearing Fluorescent Powder Techology in Compact Fluorescent Lamps
紧凑型节能灯无机粘结剂水涂粉工艺的研究 - The yield criterion of powder compact
粉末体的屈服准则 - Aluminum foams were fabricated by Powder Compact Foaming ( PCF) process.
采用粉末致密化发泡（PCF）工艺制备了泡沫纯铝，对制备过程及影响孔结构的因素进行了分析。 - Study on Iron-matrix powder compact of laser sintering
铁基粉末冶金压坯激光烧结研究 - Effect of adsorption on diffusion coefficient of polyvinyl alcohol in alumina powder compact
分子吸附对聚乙烯醇在氧化铝粉末压缩体中扩散系数的影响 - The infiltration parameters of CuW pseudobinary alloy were studied through theoretic deduction and experimental study. A formula was given out to show the relationship among infiltration time and tungsten powder size, pore fraction and CuW compact height.
通过对CuW假两相合金的熔渗参数的理论分析和实验研究，给出了熔渗时间与钨粉粒径、压坯孔隙率、压坯高度之间的定量关系式。 - Properties of PZT Films Grown by RF Sputtering Ceramic Powders and Powder Compact Targets
陶瓷粉末靶与陶瓷块状靶溅射制备PZT薄膜的性能比较 - The results show that the main factor affecting powder flowability is the aggregation of powder particles while the powders are in incompact state and the friction between the powder particles while the powders are in compact state.
结果表明：影响松装状态磁粉流动性的主要因素是粉末颗粒团聚，影响密实磁粉流动性的主要因素是颗粒间的摩擦力。 - Study on flame spray welding by using cast tungsten carbide alloy powder preformed compact and wear resistance
铸造碳化钨硬质合金粉末预成形块火焰喷焊工艺及耐磨性的研究 - Combustion synthesis of Si powder compact with large dimensions under high pressurized nitrogen is investigated.
研究了大尺寸Si粉坯在高压氮气中的燃烧行为，通过调整工艺参数，获得了完全氮化的Si3N4陶瓷多孔坯体。 - The microwave sintering dynamic mechanism of the spherical Cu powder and its compact was discussed.
探讨了微波烧结球形铜粉及其压坯的动力学机制。 - Because of the increasing of temperature during high velocity compaction, the metal powder is softened and easy to compact.
对所建立方程的分析显示，在高速压制中由于温度的变化，使得金属粉末出现软化现象，即粉末更容易被压实，从而使压坯零件有较高的密度。 - The results of theoretic analysis show that increase the thermal conductivity of powder can effectively improve the performance of compact.
理论分析结果表明，提高粉末的热传导率能够有效提高压坯各个性能。 - Various kinds effect factors of the Cu powder and TiB2/ Cu composite powder compact sintered by microwave were systematically studied.
系统探讨了微波烧结Cu粉及TiB2/Cu复合粉末压坯的各种影响因素。 - According to accumulated deformation and different shear deformation character multiple passes rearrange the powder, change pore shape, compact powder material further.
多道次挤压由于变形量的累积和不同的剪切特征不断地改变内部的孔隙形状和内部基体材料的重排使得材料进一步致密。